Quick Nozzle helps to change back your machine after flying to PWC mode very easily, by using the same coupling system that the U-Pipe uses. Within a minute you can change between PWC mode or Flyboard mode. The Quick Nozzle is universal and works with ALL PWC on the market. What changes is the steering cable connection adapter, which is model specific.
The Kit consists of the following parts: -
FB02014 - 1 x Indexing Finger 12
FB03026 - 4 x Ring Srew
FB03011 - 1 x U-Pipe Ring
FB02013 - 4 x H M10 Nut
FB02012 - 4 x CHC M10x50 Bolt
FB02291 - 2 x CHC M8x10 Bolt
FB03285 - 1 x Nozzle
FB03286 - 1 x Directional Nozzle
FB03222 - 1 x Yamaha Adapter Ball
FB02219 - 1 x Female Quick Ball
FB03233 - 1 x Male Quick Ball
Remove the male part (ball) from the female part. Screw the male part onto the mobile part of the nozzle ref. FB03QN, on the top or bottom of the directional handle (depending on your PWC model), so the steering cable remains in its axis as much as possible.
FB03222 - Screw inside the female part of the quick ball ref. FB03219 and mount onto the steering cable in place of the original quick ball.
FB03219 - Reassemble the male and female part together
Version 4 - Page 43